this product manufactured with lead-free processing pb do not scale from this print hfem2-xxx-t-xx.xx-se-xxx no of positions -020, -040, -060 (per row) length -03.00: 3.00[76.2] inches -05.00: 5.00[127.0] inches -10.00: 10.00[254.0] inches -mh: mounting holes (see fig. 2, sheet 2) -rt1: retention feature (see fig. 3, sheet 3) (leave blank for standard) option (male-female) transfer end -se: single ended *=not tooled "c" ref (see table 2) "a" ref (see table 1) .020 0.51 (typ) "b" (see table 1) c qse-xxx-01-h-d-a (see table 2) qte-xxx-01-h-d-a-xxx (see table 2) 01 01 label l l c l c .570 ref 14.48 .550 13.97 ref .010 0.26 ref .200 .010 5.09 0.25 .240 .010 6.11 0.25 c1 c2 c hfem2-060-t-10.00-se shown fig. 1 m sheet of unless otherwise specified, dimensions are in inches. tolerances are: decimals angles .xx: .01 [.3] 2 .xxx: .005 [.13] .xxxx: .0020 [.051] connector materials: high speed flex 0.8mm assembly by: hfem2-xxx-t-xx.xx-se-xxx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing j cummings 12/27/2004 4 1 sheet scale: 1:1 insulators: lcp contacts, terminals, & ground planes: phos bronze c:\enterprisevault\dwg\misc\mktg\hfem2-xxx-t-xx.xx-se-xxx-mkt.slddrw note: 1. represents a critical dimension. 2. all dimensions to be symmetrical about centerline within .002[.05] unless otherwise stated. 3. layer package in pawpak with foam . 4. all signals routed pin to pin, e.g. 1 to1, 2 to 2, etc. 5. parts to be rohs compliant see cross section detail flex materials: 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322 revision m
.125 (typ) 3.18 (see table 2, sheet 1) "d" ref (see table 2, sheet 1) "e" ref .227 ref 5.77 .232 ref 5.89 c l fig. 2 -mh option (same as fig. 1, unless otherwise stated) hfem2-060-t-10.00-se-mh shown .550 13.97 ref .570 14.48 ref .231 .010 5.88 0.25 .271 .010 6.89 0.25 c4 c3 qspr-02 4/40 x 5/16" phil. head round machine screw max torque 2-4 in-oz screw down application view "d" (see table 2, sheet 1) .178 4.52 npth (typ) (for qspr-02) recommended layout for -mh screw down options c l c l reference recommended qxx pcb layout coverfilm cross section of flex & stiffener coverfilm copper clad adhesive stiffener not to scale .002[0.05] polyimide .001[0.03] adhesive 1/2 oz copper .001[0.03] adhesive .001[0.03] polyimide .001[0.03] adhesive 1/2 oz copper .001[0.03] adhesive .002[0.05] polyimide .001[0.03] adhesive standard: .062[1.57] fr4 -mh option: .093[2.36] fr4 -rt1 option: .093[2.36] fr4 c l c l sheet of high speed flex 0.8mm assembly by: hfem2-xxx-t-xx.xx-se-xxx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing j cummings 12/27/2004 4 2 sheet scale: 1:1 revision m c:\enterprisevault\dwg\misc\mktg\hfem2-xxx-t-xx.xx-se-xxx-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
.2305 ref 5.85 sheet 1) "g" ref (see table 2, sheet 1) "f" ref (see table 2, .125 typ 3.18 sheet 1) "e" ref (see table 1, c l fig. 3 -rt1 option (same as fig. 1, unless otherwise stated) hfem2-060-t-10.00-se-rt1 shown qse-xxx-01-h-d-a-rt1 (see table 2) qte-xxx-01-h-d-a-rt1 (see table 2) 270 min circumferential wetting 270 min circumferential wetting .271 .010 6.89 0.25 .231 .010 5.88 0.25 .401 .010 10.20 0.25 .570 ref 14.48 .550 ref 13.97 .270 ref 6.86 c4 c3 .067 (typ) 1.70 c l sheet of high speed flex 0.8mm assembly by: hfem2-xxx-t-xx.xx-se-xxx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing j cummings 12/27/2004 4 3 sheet scale: 1:1 revision m c:\enterprisevault\dwg\misc\mktg\hfem2-xxx-t-xx.xx-se-xxx-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
sheet of high speed flex 0.8mm assembly by: hfem2-xxx-t-xx.xx-se-xxx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing j cummings 12/27/2004 4 4 sheet scale: 1:1 revision m c:\enterprisevault\dwg\misc\mktg\hfem2-xxx-t-xx.xx-se-xxx-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
|
